Alpha Communications® Mail Boxes - Directories - Key Keepers

Mail Boxes - Directories - Key Keepers

Vandal-Resistant Panel. Brushed Stainless Steel finish with solid metal pushbuttons and metal speaker grille. Can be made in flush or surface type and in custom sizes.

The Alpha Communications® VIP™ Series Stainless Steel (Vandal-Resistant) directory units are designed to mount right on the surface of the wall. Made of heavy-gauge brushed stainless steel, the VIP™ directories hold up to 10, 22, 32, 44 or56 engraved (or blank) directory strips, protected by a polycarbonate window. For installations requiring more than 56 names, simply mount additional directory units side-by-side (or order custom-size directory units). Installation is quick, easy, attractive and requires no back box. Name insertion and maintenance requires the use of a Star type screwdriver tip. The use of Star Head screws makes it nearly impossible to open the directory without the use of the special tool (included with each directory unit). The engraved strips are held in place by an extruded aluminum track, with a 'stop' on the bottom to prevent names from falling out, once installed onto the wall. The VIP™ directory units can be used in conjunction with lobby entry intercom panels, or as a stand-alone directory installation.

VIP056D (shown)

FEATURES
• Heavy Gauge Brushed Stainless Steel Faceplate
• Easy Installation--Mounts Right on Surface of the Wall
• 10, 22, 32, 44 and 56-Name Capacity Models Available
• Names are Protected by a Thick Polycarbonate Window
• Rugged and Good-Looking. Vandal-Resistant
• Works with a variety of apartment intercom and video-intercom entry panels
• Tamper-Resistant Star Head Screws Used
• Includes Special Star Screwdriver Tip for Name Access

SPECIFICATIONS


Dimensions:	Depends upon individual panel configuration.
Construction:     Heavy 16 Gauge High-Carbon Stainless Steel Faceplate with 
		Polycarbonate directory window.
Tool Required:   Star Head screwdriver tip required for panel installation/removal and directory
		name insertion and maintenance, included with each VI402 V.I.P. panel ordered.


     
ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
The alphabetical directory unit(s)  shall be Alpha Communications® Model VIP0__D (for 10, 22, 
32, 44 or 56 names), or approved equal, and shall be mounted right on the surface of the wall.  
Contractor shall fasten the directory unit(s) securely to the wall.   No back box shall be required.  
Directory unit(s) shall be made of heavy-gauge brushed stainless steel, with the name strips protected 
by a sheet of clear Polycarbonate. Name insertion and maintenance shall require the use of a Star 
head type screwdriver tool.  Contractor shall provide one (1) screwdriver tool (per building), to the 
building management (or superintendent), for future directory name maintenance.  Directory shall 
have an extruded aluminum track to hold the engraved (model TDS) name strips.  Extruded directory 
strip track shall have a 'stop'  at the bottom to prevent name strips from falling out, once directory is 
secured to the wall.


	
MODELS AVAILABLE
VIP010D:	  10-Name Capacity. 4.25"W (108mm) x   4.50"H (115mm) x 0.38"D (10mm)
VIP022D:	  22-Name Capacity. 4.25"W (108mm) x   7.50"H (191mm) x 0.38"D (10mm)
VIP032D:	  32-Name Capacity. 4.25"W (108mm) x 10.50"H (267mm) x 0.38"D (10mm)
VIP044D:	  44-Name Capacity. 4.25"W (108mm) x 13.50"H (343mm) x 0.38"D (10mm)
VIP056D:	  56-Name Capacity. 4.25"W (108mm) x 16.50"H (420mm) x 0.38"D (10mm)