Alpha Communications Apt. Intercom Stations (Handset Type)

Apt. Intercom Stations (Handset Type)

2-Wire Apt. Handset Station. White Color. Mounts right on Surface of Wall or over Single Gang Electrical Back Box. Requires only 1 common and 1 selective wire.

The TA292A handsets are designed to work as an apartment type handset intercom station and feature compact modern styling and advanced electronic design using dynamic speech elements and a reliable hookswitch. The TA292A is molded of high-impact ABS plastic in a fog white color. Best of all, the TA292A requires only (2) conductors, #22AWG (1-common plus 1-selective). These attractive handsets easily surface mount right on the wall or over a single gang flush electrical back box (or plaster ring). A momentary push-button in the handset is used for door release.

TA292A

FEATURES

Clear, true voice reproduction

Easy to use and install

Ideal for Bell-Buzzer Upgrades

Advanced design

Audio Tone Signal

Two-Wire Installation

SPECIFICATIONS

Dimensions:	Height:	8.75" (222mm) Less Coiled Cord
	Width:	4.50" (114mm)
	Projects:	2.75" (70mm) from mounting surface
Finish:	Durable, high-impact, flame retardant fog white ABS plastic.
Push-Button:	Replaceable type with self-wiping plated contacts, for Door release function.
Speaker/Mic:	Dynamic type with voice response. Also used for electronic tone signal.
Mounting:	Mounts right on surface of finished wall, or over single gang electrical "GEM" box.

ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
Apartment handset stations shall be Alpha Communications®/Tektone model TA292A or approved equal, equipped with momentary action push-button for DOOR release operation. The speaker/ microphones shall be a dynamic high-sensitivity type with voice-frequency response. Screw terminal connections shall be provided for positive wiring termination. The handset station shall be molded of high-impact, flame retardant ABS plastic, in a fog white finish.

REQUIRED COMPONENTS:
PK292A Amplifier (1 per system)
DO-001 (or equivalent) Door Release
SS102A or SS105B 16VAC Transformer (for PK292A)
Lobby Entry Panel (1 per building entry)
S1 Screwdriver (for installation/maintenance)

OPTIONAL COMPONENTS:

DZ209/5 and/or DZ209/10	Diode Board Adaptors (used on lobby panels that do not have built-in diodes, such as the AM629 and AM649 series).
PK502B	Multi-Entrance Relay Adaptor (use 1 for each additional entry panel after 1st panel- maximum of 8 entrances). No additional transformer needed.
PK407A	Specialty Relay Adaptor. Used when connecting a door opener other than a 16VAC type to system. One (1) required for each building entry door opener.

WIRING REQUIREMENTS:
Apartment riser wiring shall be 1-common #22AWG and 1 selective wire #22AWG, for each handset station connected to the riser cable. Add 1-#22AWG common wire if 2nd tone signal will be used with optional apartment pushbuttons, to signal apartments when visitor is at apartment door. See wiring diagram nos. IL521 and AWD003 for more complete wiring information.