Alpha Communications® Home and Office Intercoms

Home and Office Intercoms

Master to remote intercom. Has built-in electronic door chime and momentary door release pushbutton. Surface mount units. Operates on batteries or 6VDC adaptor.

The Alpha Communications® Duo-Com™ series intercom system is our lowest cost master/remote intercom for door entry or any other application requiring a single master and a remote intercom station.

The SM202 master station has a built-in amplifier and electronic door chime. It can easily mount right on the surface of the wall (over a single gang electrical 'gem' box). A built-in momentary door release button allows hook-up to your own low-voltage door opener (depending upon transformer used). The optional PK407A door opener relay allows connection to magnetic door locks or other 'fail-safe' type door openers.

The SM202 is designed to be used with the OR202 remote station, but a wide variety of remote stations is available in ABS plastic, extruded aluminum, stainless steel, polished brass and painted finishes.

The SM202 and OR202 remote are available in a packaged kit form, along with 10 meters of connecting cable. Ask for our model #SM202K Duo-Com™ kit.

SM202K

FEATURES

Requires only 2-Wires for Intercom and Electronic Chime

Powers from 4- 'C' Batteries or Optional DC Power Supply

Built-in Electronic Chime

Built-in Momentary Electric Door Release Pushbutton

Modern Styling

Master can mount over existing Door Chime Station

Wide Variety of Weather-Resistant Remotes

SPECIFICATIONS/DIMENSIONS

SM202:	Height:	7.50" (191mm)
	Width:	5.13" (131mm)
	Projects:	1.63" (42mm) from surface of wall
OR202:	Height:	4.75" (121mm)
	Width:	3.50" (89mm)
	Projects:	1.25" (32mm) from surface of wall

ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
The intercom system shall be Alpha Communications® Duo-Com™ series, or approved equal. Master station (model SM202) shall be surface mount and shall include a built-in voice amplifier, electronic chime signal and momentary electric door release pushbutton. Master shall be powered by 4- 'C' batteries (or optional SS6C DC power supply adaptor). Master station shall have intercom and chime volume controls and a Talk/Listen switch. The Listen circuit shall automatically time-out after approximately 20 seconds. Outdoor remote station shall be the model OR202, and shall surface mount right on the surface of the wall, or over a single gang electrical 'gem' box.

Contractor shall furnish and install a (compatible) electric door release, and related power supply, if required.

Contractor shall observe all local and national electrical codes.

REQUIRED COMPONENTS:

SM202K

Duo-Com™ Kit. Each kit includes one (1) SM202 master station, one (1) OR202 remote station and 33 feet (10m) of connecting cable for the intercom functions. Powers off of 4- 'C' batteries or optional SS6C DC power supply adaptor.

OPTIONAL COMPONENTS:

CP202SS	Stainless Steel Cover plate to protect the OR202 outdoor remote station. Mounts over OR202 remote to provide protection against vandalism.
PK407A	SPECIALTY RELAY ADAPTOR. Used when connecting a door opener other than a non-fail-safe type to system, such as a magnetic door opener.
SS6C	6VDC POWER SUPPLY ADAPTOR. Plugs into standard 120VAC outlet, and provides low-voltage power for SM202 intercom functions.
?????	ELECTRIC DOOR OPENER. Must be low-voltage type. Powered by separate low- voltage transformer or power supply (compatible with door opener being used).

WIRING REQUIREMENTS:
Run a 2-conductor twisted pair #22AWG cable from the SM202 master to the OR202 remote station, up to 250 feet. For runs up to 1,000 feet, use a 2-conductor (shielded) #18AWG cable. Run a 2-conductor #18AWG cable from the SS6VDC power supply (if used) to the SM202 master up to 50 feet. Run a 2-conductor #18AWG cable from the SM202 master to the optional electric door opener, up to 50 feet. NOTE: the audio and door opener and transformer cables must be in separate jackets and not in the same cable jacket. See system wiring diagram for more complete wiring information.