Alpha Communications® Nurse/Emergency-Call Components

Nurse/Emergency-Call Components

The SF101C staff stations are used with the NC110N series visual nurse-call system. A momentary CALL button initiates the call and a CANCEL button cancels the call.

The Alpha Communications® SF101C Staff Station incorporates push button operation of call and cancel functions. A call is registered at the annunciator panel and on a corridor light or corridor zone light (if installed) when the call switch with integral "CALL-PLACED" LED is pushed. The"CALL-PLACED" LED is also illuminated. Calls are cancelled simply by depressing the"CANCEL" button mounted on a rugged ABS plastic faceplate. The "CALL-PLACED" LED will also be extinguished.

SF101C

FEATURES
• UL® 1069 Listed - 4th Edition Standards
• Simple, push button calling
• Call-placed indicator
• Call-reset push button
• Call activates lamp on annunciator panel and corridor light
• Flame retardant type ABS plastic faceplate
• Corridor zone light capability

SPECIFICATIONS

Dimensions:	Height:	4.50" (114 mm)
	        Width:	2.75" (69mm)
	        Depth:	1.75" (44mm)
	        Projects:	0.44" (11mm) from mounting surface
Construction:	Flame retardant type ABS plastic face plate. Switches and 
		electronic components are circuit board mounted.
Connections:	Plug-in connectors
Housing:	Single gang ring (IH357) with square box (IH358)


     
ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
The staff station shall be Alpha Communications®/Tektone model SF101C 
or approved equal, and shall include an integral "CALL-PLACED" 
LED, a "CALL" button, and a "CANCEL" button. A call
will be registered at the annunciator panel, a corridor zone light (if installed), 
and the station's CALL-PLACED" LED. All electronic components needed 
for these features shall be mounted on a printed circuit board and all station 
components shall be mounted an a rugged ABS plastic faceplate. The station 
shall be installed in a single gang ring with square box. Plug-in connectors
shall be provided for connections. Contractor shall observe all local 
electrical codes.

The SF101C shall be U.L. 1069 Listed to the latest 4th Edition Standards.


WIRING REQUIREMENTS:
See system wiring diagram no. IL381 for more complete wiring information.