Alpha Communications® Nurse/Emergency-Call Components

Nurse/Emergency-Call Components

The SF100C patient stations are used with the NC110N series visual nurse-call system. They can be used with the SF301/8 (single) or SF302 (dual) call cord set(s).

The Alpha Communications®/Tektone SF100C visual patient station includes a jack for the insertion of a model SF301/8 (single) or SF302 (dual) call cord set (or equivalent). The SF100C is used with the NC110N series visual nurse-call system only A call is registered at the annunciator panel and corridor light (and corridor zone light if installed) when the call cord button isused, or if the call cord is accidentally removed from the jack. The station includes a lighted 'CALL-PLACED' indicator when a call is placed and a 'CANCEL' button, mounted on a rugged ABS white plastic faceplate.

SF100C

FEATURES
• U.L. 1069 Listed - 4th Edition Standards
• Simple Push-button Calling
• Lighted CALL-PLACED Indicator
• Call-reset CANCEL Push-button
• Call Automatically Registers if Call Cord is Accidentally Removed
• Flame Retardant type ABS White Plastic Faceplate
• Corridor Zone Light Capability (optional)

SPECIFICATIONS

Dimensions:	Height:	4.50" (114mm)
		Width:	2.75" (69mm)
		Projects:	0.44" (11mm) from mounting surface
Mounting:     	Mounts over standard 1-gang electrical back box with 
	        plaster ring (model IH358 with model IH357).


     
ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
The patient stations shall be Alpha Communications®/Tektone SF100C, 
or approved equal and shall include a lighted 'CALL-PLACED' indicator, 
a 'CANCEL' button, and a jack for the required model SF301/8 (single) 
call-cords or model SF302 (double) call-cords (or other specialty type
cords as required). A call will be registered at the annunciator panel(s), 
corridor light(s) and any optional corridor zone lights. The station's 
'CALL-PLACED' LED will light if the call switch is pushed or of the 
call-cord is removed from its jack. All electronic components needed 
for these features and functions shall be mounted on a printed circuit 
board and all station components shall be mounted on a rugged ABS 
(White) plastic faceplate. The station shall be mounted into a standard 
single gang electrical box (or ring). A plug-in connector shall be provided 
for connections. 

The SF100C shall be U.L. listed 1069 to the latest standards. 
Contractor shall observe all local and national electrical codes.


	
WIRING REQUIREMENTS:
See system wiring diagram no. IL381 for more complete wiring information.