Alpha Communications® Misc. Specialty Products and Tools

Misc. Specialty Products and Tools

Indoor Alphatone Chime Station. Wood- grain Plastic finish. Can surface mount right on wall or over single gang electrical flush back box. Operates on 16VAC.

The Alpha Communications® R2007S series indoor Alphatone™ chime units are designed to fully surface mount on the finished wall surface. They can also be mounted over a single gang flush electrical 'gem' box. No back box is required for surface wall mounting. The model R2007S is finished in a Walnut wood grain and black finish. The model R2007SW is finished in an All-White plastic finish. The R2007S units are 2-wire type and power from a 16VAC input. A screwdriver selectable control allows the user to change volume/pitch of the electronic 'warble' type chime sound.

R2007S

FEATURES
• Requires only 2-Wires
• Can be Fully Surface Mounted without any Back Box
• Modern Styling
• Provided with Tamper-resistant Scrulox Mounting Screws
• Choose from Woodgrain models or White (suffix W) models

SPECIFICATIONS

DIMENSIONS


Dimensions:
	Height:    5.25" (134mm)
	Width:    4.00" (102mm)
	Projects:   1.25" (32mm) from surface of wall
     



ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
The remote Alphatone™ chime station shall be Alpha Communications® R2007S (or R2007SW),
or approved equal. Remote chime station shall be surface mount and shall be finished in a Wood-
grain/ Black finish (R2007S) or All-White finish (R2007SW). Remote shall be secured to the wall
with tamper-resistant scrulox mounting screws. Contractor shall observe all local and national electrical codes.


	
REQUIRED COMPONENTS
S1           Screwdriver (for system installation/maintenance).


	
BACK BOXES/HOUSINGS 
(Not Required for 'OR6' Remotes):


	
WIRING REQUIREMENTS
The R2007S remotes require only 2 wires. See individual system wiring diagram for more
complete wiring information, pertaining to wire gauge and distance requirements.