Alpha Communications® Indoor and Outdoor Remote Stations

Indoor and Outdoor Remote Stations

Outdoor Remote Station with Illuminated Call button. Woodgrain Plastic finish. Can Surface mount right on wall or over single gang electrical flush back box.

The Alpha Communications®/Tektone OR604A and OR604AW series outdoor remotes are designed to fully surface mount on the finished wall surface. They can also be mounted over a single gang flush electrical 'gem' box. No back box is required for surface wall mounting.

The OR604A is finished in a Walnut woodgrain and black finish and the OR604AW is an all-White version. Both models feature a momentary, illuminated call button.

The OR604A (and OR604AW) remotes are 4-wire type and are normally used only with the IR704B, IR704BD, PK724 and the 'EK' series music-intercoms.

OR604AW (shown)

FEATURES

Built-in Momentary Illuminated Call Button

RCan be Fully Surface Mounted without any Back Box

Modern Styling

Provided with Tamper-resistant Scrulox Mounting Screws

Choose from Woodgrain models or White (suffix W) models

Hands-Free Reply

SPECIFICATIONS/DIMENSIONS

Dimensions:	Height:	5.25" (134mm)
	Width:	4.00" (102mm)
	Projects:	1.25" (32mm) from surface of wall

ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
The outdoor remote station(s) shall be Alpha Communications®/Tektone OR604A/OR604AW or approved equal. Remote station shall be surface mount and shall include a mylar cone loudspeaker and built-in plastic momentary illuminated Call Button. Remote station shall be finished in a Woodgrain/Black finish (OR604A) or All-White finish (OR604AW). Remote shall be secured to the wall with tamper-resistant scrulox mounting screws. Contractor shall observe all local electrical codes.

REQUIRED COMPONENTS:

S1	Screwdriver (for system installation/maintenance).
BACK BOXES/HOUSINGS (Not Required for 'OR6' Remotes)

WIRING REQUIREMENTS:
Depends upon intercom systems being used. See individual system wiring diagram for more complete wiring information.