Alpha Communications® Indoor and Outdoor Remote Stations

Indoor and Outdoor Remote Stations

Outdoor Remote Station with Momentary Call button. Black Plastic finish. Can Surface mount right on wall or over single gang electrical flush back box.

The Alpha Communications® OR202 outdoor remotes are designed to fully surface mount on the finished wall surface. They can also be mounted over a single gang flush electrical 'gem' box. No back box is required for surface wall mounting. The OR202 is finished in Black plastic, to blend with almost any decor, and to minimize dirt and grime. They are designed to work with our SM202 Duo-Com intercom system. A maximum on two (2) OR202 remotes can be connected to a single SM202 master station.

OR202

FEATURES

Requires only 2-Wires for Intercom and Call

Black Plastic finish minimizes dirt and grime

Can be Fully Surface Mounted without any Back Box

Modern Styling

Built-in Momentary Call Button

Provided with Black Mounting Screws

SPECIFICATIONS/DIMENSIONS

Height:	5.25" (134mm)
Width:	4.00" (102mm)
Depth:	1.25" (32mm) from surface of wall

ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
The outdoor remote station(s) shall be Alpha Communications® OR202 or approved equal. Remote station shall be surface mount and shall include a mylar cone loudspeaker and built-in plastic momentary Call Button. Remote station shall be finished in a Black plastic finish. Contractor shall observe all local and national electrical codes.

OPTIONAL COMPONENTS:

CP202SS

Stainless Steel Cover plate to protect the OR202 outdoor remote station. Mounts over OR202 remote to provide protection against vandalism.

WIRING REQUIREMENTS:
See SM202 (Duo-Com) system wiring diagram for more complete wiring information.