Alpha Communications® Apt. Intercom Stations (Open-Voice Type)

Apt. Intercom Stations (Open-Voice Type)

Stainless Steel 4-Wire Apt. Station Can be flush or surface mounted Features Oversized Metal Pushbuttons and Tamper-Resistant Mounting Screws

The Alpha Communications® IS407C apartment stations are designed specifically to minimize vandalism and tenant abuse. Made from .035" thick solid stainless steel, with oversized metal push buttons, these stations are made to last. A high sensitivity 3.0" speaker assures clear voice communication, as well as tone signal response. The IS407C can be mounted flush on our popular IH101 flush back box or IH102 flush mounting ring. For surface mount requirements use our model IS407S (surface) station. Positive screw terminals makes these stations easy to wire. The advanced electronic design permits use in any size building. A wide variety of optional accessories is available to provide additional functions such as multi-entrance operation, post office door release, and magnetic (fail safe type) door release capabilities.

IS407C

FEATURES

Simple push button operation

Made of Rugged Stainless Steel with Oversized Metal Pushbuttons

Tamper and Vandal-Resistant

Easy installation

Automatic privacy

Clear voice quality using high quality 3.0" voice (and tone) speaker

Simple to operate and Reliable

SPECIFICATIONS

Dimensions:	Height:	7.00" (178mm)
	Width:	5.00" (127mm)
	Depth:	1.50" (38mm) (When Flush Mounted)
	Projects:	0.50" (13mm) from mounting surface
Construction:	Solid .035" thick stainless steel faceplate.
Controls:	Individually replaceable solid metal push-buttons wih self-wiping plated contacts. Identified for TALK, LISTEN and DOOR functions.
Speaker/Mic:	3.00" (76mm) with voice response. Also used for electronic tone signal.
Mounting:	Mounts flush to wall using IH101 flush back box or IH102 flush mounting ring.

ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
Apartment stations shall be Alpha Communications® (V.I.P. series) model IS407C or approved equal. Station faceplate shall be minimum .035" solid stainless steel. Momentary action, oversized metal push-buttons shall be provided for TALK, LISTEN and DOOR functions. Button markings shall be imprinted right on the faceplate. The speaker/microphone shall be a 3.00" (76mm) high-sensitivity type with excellent voice-frequency and tone signaling response. Positive screw terminals shall be provided for wiring terminations.

REQUIRED COMPONENTS:
IH101 Flush Steel Back Box
----OR----
IH102 Flush Steel Mounting Ring
PK543 Amplifier (1 per system)
DO-001 (or equivalent) Door Release
SS102A or SS105B 16VAC Transformer (for PK543)
Lobby Entry Panel (1 per building entry)
S1 Screwdriver (for installation/maintenance)

OPTIONAL COMPONENTS:

PK502B	Multi-Entrance Relay Adaptor (use 1 for each additional entry panel after 1st panel--maximum of 8 entrances). No additional transformer needed.
PK407A	Specialty Relay Adaptor. Used when connecting a door opener other than a 16VAC type to system. One (1) required for each building entry door opener.

WIRING REQUIREMENTS:
Apartment riser wiring shall be 3-common #22AWG and 1 selective wire #22AWG, for each station connected to the riser cable. Add 1-#22AWG common wire if 2nd tone signal will be used with optional apartment pushbuttons, to signal apartments when visitor is at apartment door. See wiring diagram no. IL487 for more complete wiring information.