Alpha Communications® Apt. Intercom Stations (Open-Voice Type)

Apt. Intercom Stations (Open-Voice Type)

Steel 6-Wire Apt. Station with White Painted Finish. Used only to replace Auth #3311 apt. stations. Features plastic push-buttons and ABS plastic speaker grille.

The IR086S apartment stations are designed specifically to replace the Auth #3311 type apartment intercom stations. Made of steel (instead of plastic like the 3311) the IR086S is a rugged station, made to last long. True self-wiping push-button switches and a larger 3.50" voice and tone speaker, allow the IR086S last longer and sound better than the original 3311 type apartment stations. The IR086S station features a PC board edge connector, allowing you to directly plug in the existing Auth wiring harness, directly onto the IR086S PC board. If the plug in harness is missing or defective, the IR086S comes with (6) pigtail wires, allowing you to directly connect your riser wiring to the pigtails, eliminating the plug in harness.

IR086S

FEATURES

Simple push button operation

Automatic privacy

Easy installation

Mounts directly onto the 3311 flush or surface back box.

Standard with PC board edge and pigtail wire connections

Attractive White station with Steel faceplate

SPECIFICATIONS

Dimensions:	Height:	6.78" (175mm)
	Width:	6.13" (155mm)
	Projects:	0.50" (13mm) from mounting surface
Construction:	Steel face plate with white vinyl coat
Controls	Replaceable push-button assembly with self-wiping plated contacts. Identified for TALK, LISTEN and DOOR functions.
Speaker/Mic:	3.50" (89mm) with voice response. Also used for electronic tone signal.
Mounting:	Mounting holes are positioned vertically 5.50" (center to center) to mount over existing BB30 or BB51 back boxes. Supplied less mounting screws.

ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
Apartment stations shall be Alpha Communications®/Tektone model IR086S or approved equal. Station shall be designed to directly replace the Auth 3311 type apartment intercom stations. Momentary action pushbuttons shall be provided for TALK, LISTEN, and DOOR operations. The speaker/microphone shall be a 3.5" high-sensitivity type with voice-frequency response. The IR086S shall be provided with PC board edge connector and pigtail wiring connections. Station shall be made of a steel faceplate with a white vinyl coating.

REQUIRED COMPONENTS:
PK543 Amplifier (1 per system)
DO-001 (or equivalent) Door Release
SS102A or SS105B 16VAC Transformer (for PK543)
Lobby Entry Panel (1 per building entry)
S1 Screwdriver (if required for lobby panel)

OPTIONAL COMPONENTS:

PK502B	Multi-Entrance Relay Adaptor (use 1 for each additional entry panel after 1st panel--maximum of 8 entrances). No additional transformer needed.
PK407A	Specialty Relay Adaptor. Used when connecting a door opener other than a 16VAC type to system. One (1) required for each building entry door opener.

WIRING REQUIREMENTS:
Apartment riser wiring shall be 5-common #22AWG and 1 selective wire #22AWG, for each station connected to the riser cable. Add 1-#22AWG common if 2nd tone signal will be used with optional apartment pushbuttons, to signal apartments when visitor is at apartment door. See the existing system wiring diagram for more complete wiring information.