Alpha Communications® Frames - Housings - Back Boxes

Frames - Housings - Back Boxes

The IH400A Desk and Surface Cabinet is a White ABS plastic housing that allows a variety of indoor remote stations to be desk or surface mounted (on an angle).

The Alpha Communications® IH400A series desk cabinets are designed to work with many of our popular plastic inside master and remote intercom stations, to allow them to be mounted on a table or desktop. The IH400A series desk cabinets can also be used as a sloped surface wall cabinet, where required. Made from the same durable ABS plastic as our plastic intercom masters and remotes, the IH400A desk cabinets are a stylish addition to our intercom line. The IH400A desk cabinets are available with one or more auxiliary push buttons mounted on the side, for electric door release or other signaling purposes. When surface mounting, the IH400A desk cabinets are predrilled to mount over single and double gang electrical back boxes, or right on the surface of the finished wall. Four (4) self-stick rubber feet are supplied to prevent slippage when the IH400A cabinet is used on a table or desk top.

IH400A

FEATURES
• Made of Durable ABS Off-White Plastic in a Textured Finish
• Easy Installation to Master or Remote Intercom Station
• Can be Desk or Surface Wall Mounted
• Available with one or more Momentary Pushbuttons Mounted on the Side, for Electric Door
Release or Other Signaling Purpose
• Works with a Variety of Master and Remote Stations

SPECIFICATIONS


Dimensions:

        Height:     7.00" (178mm)

         Width:   5.00" (127mm)

         Depth:     2.00" (51mm) from finished wall/desk surface (at highest point)




   
OPTIONAL MODELS

Model IH400A/1B (with 1 momentary pushbutton installed on the side).
Model IH400A/2B (with 2 momentary pushbuttons installed on the side). 

Other options available. 


NOTE: Unless specified otherwise the pushbuttons on the side of the IH400A/1B and IH400A/2B
           are low-voltage, single-pole, normally open circuit pushbuttons.