Alpha Communications® Apt. Intercom Stations (Handset Type)

Apt. Intercom Stations (Handset Type)

5-Wire Apt. Handset Station. Available in White, Grey, Ivory, Black or Brown. Mounts right on Surface of Wall. Can be flush or desk mounted with optional adaptors.

The Alpha Communications®/S.T.R™ HT2003/2 handsets are designed to work as an apartment type handset intercom station. They are available in White, Grey, Ivory, Black or Brown colors. These attractive 5-wire handsets easily surface mount right on the wall or over a single gang flush electrical back box (or plaster ring). Handsets can be changed to desk mount with the addition of a model TZ1003 desk adaptor, or can be flush mounted with the addition of a model UM1004 flush housing/trim assembly. All HT2003/2 handsets feature textured finish (to minimize scratches and fingerprints), electric buzzer signaling (adjustable), heavy duty coiled cord with strain relief and (2) two momentary button switches. These switches can be used for door release, or other signaling functions, depending upon system configuration. With the addition of a low-cost Model R2007 Alphatone™ chime adaptor, you can easily change the electric buzzer to a modern warble chime tone sound.

HT2003/2

FEATURES

Convenient Duplex Voice Operation

Easy Installation

Clear Voice Fidelity using Electret Condenser Microphones

Rugged and Reliable

Simple to Operate

Mounts Flush, Surface or Desk

Available in White, Grey, Ivory, Black or Brown color

SPECIFICATIONS

Dimensions:	Height:	8.50" (218mm) Less Coiled Cord
	Width:	3.20" (82mm)
	Projects:	2.375" (56mm) from mounting surface
Receiver:	50mm round, 45 ohms, Model HK1.
Microphone:	Electret Condenser Type, MK1 series
Push-Buttons:	(1) with Door Opener (KEY) symbol and (1) spare (Red Dot) symbol.

ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
The apartment handset station shall be Alpha Communications®/S.T.R.™ HT2003/2, in (White, Grey, Ivory, Black or Brown) color. Handset shall be mounted surface (or flush or desktop with optional adaptor). Handset shall feature electret condenser microphone for exceptional voice fidelity. Handsets that include carbon transmitter or other voice technologies shall not be acceptable. Handset shall have a textured finish and heavy-duty coil cord. Handset shall include a door release (KEY SYMBOL) button and auxiliary (RED DOT) push button. Push-buttons shall be clearly visible and shall be marked in a different color from the handset. Handset shall include an adjustable volume AC buzzer (or optional R2007 Alphatone™ adaptor).

REQUIRED COMPONENTS:
NH200A Amplifier (1 per system), which installs in a separate central equipment location (or behind lobby panels with sufficient pace to mount amplifier board). DO-001 (or equivalent) 16VAC Door Release.
SS106 or SS146 16VAC Transformer (for NH200A).
Lobby Entry Panel (1 per building entry).

OPTIONAL COMPONENTS:

UM1004	Flush Mount handset adaptor with flush box.
TZ1003	Desk Adaptor for HT2003/2 series handset.
TU1007A	Multi Entrance Audio Adaptor. Used when switching audio (intercom) and door release between two (2) or more entrance stations. Used in addition to system amplifier. Use one (1) for (2) entrances, use two (2) for (3-4) entrances, use three (3) for (5-6) entrances and use four (4) for (7-8) entrances.
R1	Pulsating Buzzer Adaptor. Used when you have individual apartment door pushbuttons that need to signal (buzz) the apartment handsets. Converts steady buzzer to pulsating buzzer.
PK407A	Specialty Relay Adaptor. Used when connecting a door opener other than a 16VAC type to system. One (1) required for each building entry door opener.

WIRING REQUIREMENTS:
Apartment riser wiring shall be 4-common #22AWG and 1 selective wire #22AWG, for each handset station connected to the riser cable. Add 1-#22AWG common wire if there are optional apartment pushbuttons which will also have to signal apartment handset, when visitor is at apartment door (and when using optional R1 pulsating buzzer adaptor). See wiring diagram no. AWD013 for more complete wiring information.