Alpha Communications® Misc. Specialty Products and Tools

Misc. Specialty Products and Tools

The AP777 and AP777B adaptor plates are used to cover existing oversized flush backboxes from existing intercom stations. They are made of Steel and Painted White

The Alpha Communications® AP777 and AP777B adaptor plates are designed specifically to cover existing oversized apartment intercom back boxes and other existing wall openings.

Once the adaptor plate is affixed to the wall, you can install your open-voice or handset apartment intercom station or surface mount video-intercom station directly onto the adaptor plate.

The model AP777 features two (2) mounting holes 10.50" (267mm) on-center, top-to-bottom, to enable you to easily mount the plate over an existing 777 series flush back box. In addition, the model AP777 also features a large (center) hole for wire access and four (4) pre-punched holes for mounting common apt. intercom stations and handsets.

Installation is quick, easy, attractive and eliminates the need for plastering and painting over the existing hole.

Model AP777B is the same as the AP777, except there are no mounting holes on the front of the faceplate. This enables you to punch or drill any special holes you may need, or to leave the faceplate totally blank.

Custom-sized adaptor plates are also available in aluminum, stainless steel, polished brass, or other painted finishes. Please send a detailed sketch to our sales dept., along with the quantity needed, for a prompt quotation.

AP777 / AP777B

FEATURES
• Heavy Duty 22 Gauge Cold-Rolled Steel Faceplate
• Easy Installation with pre-punched holes
• Decorator White Color
• High Quality Epoxy Paint Finish
• Rugged and Good-Looking
• Large size neatly covers existing wall openings
• Works with a variety of apartment intercom and video-intercom stations

SPECIFICATIONS


Dimensions:	  5.50"W (140mm) x 12.50"H (318mm) x 0.188"D (5mm)
Construction:	  Steel faceplate with painted Decorator White epoxy coat finish
Center Hole:    1.00" diameter  (25mm) round hole for wire
		            (No holes in faceplate of model AP777B)



ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
The adaptor plates shall be Alpha Communications® Model AP777 (or AP777B) or approved
equal and shall be large enough to cover the area occupied by the previous intercom unit. The
adaptor plate shall be made of 22 gauge cold-rolled steel, painted in a Decorator White finish
epoxy paint. The adaptor plate shall be punched to cover the existing back box, and for the
apartment intercom (or video-intercom) station to be mounted onto the adaptor plate. If required,
contractor shall paint the adaptor plate to match the existing wall finish.