Alpha Communications® Apt. Intercom Lobby Panels/Pedestals

Apt. Intercom Lobby Panels/Pedestals

Economy Style Panel. Natural Anodized Aluminum finish with plastic pushbuttons and plastic speaker grille. Used with the TA292 and TA292A apt. handsets only.

The AM629 series entrance panel is a one-piece panel, for use with our TA292A (handset type) apartment intercom stations and PK292A amplifier. AM629 panels are equipped with a weather-resistant mylar cone speaker protected by a BLACK flame retardant polycarbonate plastic speaker grille. AM629 panels are available in two sizes. The 11.25"H version is available from 2 to 8 push-buttons, and the 19.00"H version is available from 10 to 16 pushbuttons. Both sizes are 4.75"W.Alongside each plastic pushbutton is a name holder, made of BLACK flame retardant poly-carbonate plastic with a transparent flame retardant polycarbonate plastic cover. Names can easily be inserted using paper tabs (supplied) or optional engraved plastic nameplates (model#AMNP). AM629 panels are available in a flush or surface configuration. Add the suffix 'S' to the model number for the surface version. Flush models require a flush back box (model #OH600 or #OH601). Surface models do not require any back box or housing.

AM629/08 (shown)

FEATURES

Our Lowest Cost Duplex Panels

Hands-Free Duplex Loudspeaking

Weather-resistant Mylar Speaker and Electret Microphone

Self-Wiping Plastic Pushbuttons with built-in diodes for 2-wire handsets

Ultra Modern Styling

Flush and Surface Models Available

Surface Models are Slim-Line type and do not require any backbox

SPECIFICATIONS

Dimensions:	Height:	11.25" (286mm) up to 8 buttons 19.00" (483mm) 10 to 16 buttons
	Width:	4.75" (121mm)
	Depth:	2.00" (51mm) (When Flush Mounted)
	Projects:	2.00" (51mm) (Surface Mount Models)
Construction:	Anodized extruded aluminum panel/faceplate, with BLACK flame retardant polycarbonate top and bottom decorative end caps.
Pushbuttons:	Individually replaceable plastic type with self-wiping contacts and built-in diodes.
Speaker:	2.50" (64mm) 45 ohm, Mylar Cone, model #SK024.
Microphone:	Electret Condenser Type, model #MI004.
Housings:	OH600 for 2-8 button Flush AM629 panel. OH601 for 10-16 button Flush AM629 panel.

ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
Entrance panels shall be Alpha Communications®/Tektone AM629 series or approved equal, and shall provide (___) pushbuttons per panel. Panels shall include a weather-resistant mylar speaker behind a BLACK flame retardant polycarbonate speaker grille, as well as an electret condenser microphone and built-in (2-wire system) diodes. Pushbuttons shall be individually replaceable plastic type, with self-wiping contacts. Alongside each pushbutton shall be a BLACK flame retardant polycarbonate name holder with transparent flame retardant polycarbonate cover. The panels shall be (flush or surface) mounted. Flush models shall be supplied with the appropriate flush back box (OH600 or OH601). Contractor shall provide a model S1 screwdriver, to the building management, for any future maintenance required.

REQUIRED COMPONENTS:
S1 Screwdriver (for installation/maintenance). OH600 Flush Box for 2-8 button Flush AM629 panel. OH601 Flush Box for 10-16 button Flush AM629 panel.

WIRING REQUIREMENTS:
Depends upon apartment stations and amplifier being used. See PK292/TA292A system wiring diagram for more complete wiring information.