Alpha Communications® Apt. Intercom Lobby Panels/Pedestals

Apt. Intercom Lobby Panels/Pedestals

Economy Style Bell-Buzzer Panel. Natural Anodized Aluminum finish with plastic pushbuttons and no speaker. Used for bell buzzer type systems only without intercom.

The AM600 series entrance panel is a one-piece panel, for use with most bell-buzzer (non-intercom type) systems. AM600 panels have no speaker and no speaker grille, and are used for bell, buzzer, chime signaling only. All AM600 panels are 5.00"W and 6.88"H. Alongside each plastic pushbutton is a name holder, made of BLACK flame retardant polycarbonate plastic with a transparent flame retardant poly-carbonate plastic cover. Names can easily be inserted using paper tabs (supplied) or optional engraved plastic nameplates (model #AMNP). AM600 panels are available in a 2-button (AM602), 4-button (AM604), 6-button (AM606) and 8-button (AM608) versions, and all four (4) are the same physical size. Flush mounting requires a flush back box (model #IH101) or flush mounting ring (model #IH102) or surface back box (model#OH700).

AM608 (shown)

FEATURES

Our Lowest Cost Bell-Buzzer Panels

Choose from 4 Versions

Self-Wiping Plastic Pushbuttons

Ultra Modern Styling

Flush or Surface Mounting

Panels are Narrow Width

Convenient Built-In Nameholders

SPECIFICATIONS

Dimensions:	Height:	6.88" (175mm)
	Width:	5.00" (127mm)
	Depth:	1.50" (38mm) (When Flush Mounted)
	Projects:	0.50" (13mm) from mounting surface
Construction:	Solid Extruded Aluminum faceplate.
Controls:	Replaceable plastic push-button wih self-wiping plated contacts.
Pushbuttons:	Individually replaceable plastic type with self-wiping contacts.
Mounting:	Mounts flush to wall using IH101 flush back box or IH102 flush mounting ring. Surface mount to wall using OH700 surface back box.

ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
Entrance bell-buzzer panels shall be Alpha Communications®/Tektone AM60x series or approved equal, and shall provide (2,4,6 or 8) pushbuttons per panel. Pushbuttons shall be individually replaceable plastic type, with self-wiping contacts. Alongside each pushbutton shall be a BLACK flame retardant polycarbonate name holder with transparent flame retardant poly- carbonate cover. The panels shall be (flush or surface) mounted. Flush models shall be supplied with the appropriate flush back box (IH101) or flush mounting ring (IH102). Surface models shall be supplied with the (OH700) surface back box. Contractor shall provide a model S1 screwdriver, to the building management, for any future maintenance required.

REQUIRED COMPONENTS:
S1 Screwdriver (for system installation/maintenance). IH101 Flush Steel Back Box
----OR----
IH102 Flush Steel Mounting Ring
----OR----
OH700 Surface Back Box (Steel painted Black)

WIRING REQUIREMENTS:
Depends upon apartment stations and amplifier being used. See individual system wiring diagram for more complete wiring information.