Alpha Communications® Video-Intercom Systems

Video-Intercom Systems

Non-Coaxial Apt. Video Monitor Station. White Color. Surface mounts right on wall surface over steel backplate assembly. Can be optionally desk mounted.

The Alpha Communications®/Elvox™ 5661/000 apartment house series monitors are designed to replace existing 5-wire apartment intercoms, using the same wiring, without the need for coaxial riser wires!! These attractive monitors surface mount right onto the wall, by means of asteel backplate (supplied), or can be mounted onto one of our adaptor plates, to cover existing oversized flush backboxes.

All 5661/000 monitors feature a crystal clear 4.50" (114.3mm) black and white monitor (measured diagonally), electronic tone signaling, heavy duty coiled cord, momentary door release button, monitor activation button, contrast control and amplified handset with electret microphone, providing simultaneous Talk and Listen functions. When combined with our vandal-resistant lobby entry stations and model 6568/117 amplifier (and related accessories), the 5661/000 monitors are part of a complete building security system.

5661/000

FEATURES

Works on existing 5-wire Apt. Intercom wiring, without the need for any coaxial riser wiring!

4.50" (diagonal) Crystal Clear Black & White video screen

Convenient Duplex Voice Operation

Easy Surface Wall Installation using Steel Wall Plate

Quick Wall Plate Connect/Disconnect

Clear Voice Fidelity using Amplified Handset

Rugged and Reliable. Simple to Operate

Pleasant Electronic Call Tone Signal from Entrance Panel(s)

Low profile flush monitor protrudes only 3.50" from wall

Works with a Variety of Aluminum and Stainless Steel Lobby Entry Panels

SPECIFICATIONS

Dimensions:	All 5661/000 monitors are 8.75"W (222mm) x 8.00"H (203mm) x 3.50"D (89mm).
All dimensions shown are outside dimensions, less the coiled cord.
Handset:	Duplex Handset with Electret Microphone and heavy duty coiled cord.
Finish:	High Impact ABS Plastic, Soft White color with Black Imprinting.
Controls:	Door Release Button, Monitor Button, Contrast/Brightness Control, 2 auxiliary switches.
Video Tube:	4.50" (114.3mm) High Brightness Black and White Tube (measured diagonally).
Options:	Model IH358 flush double gang electrical box, used with model IH357 flush mount plaster ring.

ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
The apartment monitor station shall be Alpha Communications®/Elvox™ model 5661/000. Monitor shall be surface mounted on the surface of the finished wall (or over an adaptor plate to cover the existing oversized flush backbox). Monitor shall include a high quality 4.50" (114.3mm) (measured diagonally). Monitor handset shall feature duplex communication and electret microphone for exceptional voice fidelity. Handset shall include a heavy duty coiled cord. Monitor shall include a door release button, monitor on button, contrast/brightness control switch, two (2) auxiliary switches and steel backplate connector (model # 1/550). Monitor shall be constructed of high impact ABS plastic in a soft white color with black imprint. Monitor shall feature electronic call tone signaling from lobby entrance station(s). Monitor can be desk mounted using optional model 5610 desk adaptor.

REQUIRED COMPONENTS:

6568/117	Amplifier/Power Supply (1 per system), which installs in a separate central equip- ment location. Requires 120VAC primary power.
5569/004	4-Port Video Distributor. 1 required for each 4 video risers/lines if there will be more than 1 video riser/line. Installs adjacent to 6568/117 power supply.
DO-001	(or equivalent) 16VAC Door Release. Lobby Entry Panel (1 per building entry).
DZ209/5 and/or DZ209/10	(or equivalent) 16VAC Door Release.
Diode Board Adaptors (installed behind the lobby panel, wires to the push-buttons).

OPTIONAL COMPONENTS:

5596/001	2-Entrance Adaptor (Both-Video). Used when switching between two (2) video entry panels are required. Used in addition to 6568/117 power supply.
5610	Monitor Desk Adaptor. Used when the monitor needs to be desk mounted.
PK407A	Specialty Relay Adaptor. Used when connecting a door opener other than a 16VAC type to system. One (1) required for each building entry door opener.

WIRING REQUIREMENTS:
Apartment riser wiring shall be 4-common #22AWG, and 1 selective wire #22AWG, for each video monitor station connected to the riser cable. No coaxial wires are required on the video monitor riser lines. See system wiring diagram for more complete wiring information.